Metal legs are a common support component in sofa design. They are made of solid material and have various shapes, which can enhance the modern look of the furniture. However, the use and maintenance of metal materials are different from those of wooden or plastic parts. Here are a few key points to note when using a sofa with metal legs.
A. Are the screws tight: The metal feet are usually connected to the sofa body by screws. During installation, make sure that all screws are tightened in place to avoid loosening due to long-term use. It is recommended to check the screw status every 3-6 months and use tools to reinforce the screws if necessary.
B. Horizontal adjustment: If the metal feet are equipped with height-adjustable foot pads (such as swivel or rubber pads), ensure that the sofa is overall stable to avoid deformation of the metal legs or wear of the floor due to uneven force.
A. Anti-scratch treatment: The metal feet are hard and may leave scratches when they come into direct contact with wooden floors, tiles or marble. It is recommended to attach felt pads, silicone sleeves or rubber anti-slip pads to the bottom of the metal feet, which can not only protect the ground but also enhance friction.
B. Protection in humid environments: If the ground is damp for a long time, the metal feet may rust. You can apply anti-rust oil on the bottom or install waterproof gaskets, and keep the room ventilated.
A. Rust prevention: Wipe the surface of the metal legs with a dry cloth regularly to avoid water stains. If slight rust is found, wipe it gently with a soft cloth dipped in white vinegar or a special metal cleaner. If the rust is serious, contact after-sales service.
B. Avoid chemical corrosion: Do not use strong acid or alkaline detergents (such as bleach and toilet cleaner) when cleaning to avoid damaging the anti-rust coating on the metal surface. For daily cleaning, it is recommended to use neutral detergent.
Reasonable load-bearing range: Although the metal legs are strong, the maximum load-bearing capacity of the sofa must be followed. At the same time, people should avoid sitting on one side for a long time or placing heavy objects (such as fitness equipment, large suitcases) to prevent the metal feet of the sofa from being deformed.
Lift and place gently: When moving the sofa, lift the bottom and do not drag it directly, otherwise the meta legs may bend or the screws may loosen.
A. Protection for children and pets: If the edge of the metal Leg is sharp, it is recommended to install a rounded corner protective cover to prevent bumps and injuries. Families with pets should be careful to prevent pets from chewing metal parts.
B. Style matching: The color of the metal foot (such as gold, silver, black) must be coordinated with the style of the sofa and the color of the home. If you need to change the style of the metal foot (such as changing from a thin and tall foot to a thick and short leg), you need to confirm the adaptability of the load-bearing structure.
A. Abnormal noise inspection: If there is an abnormal noise at the connection between the metal foot and the sofa, it may be caused by loose screws or metal fatigue, which requires timely inspection.
B. Warranty and after-sales: Confirm the warranty period of the metal leg when purchasing, and keep the manual and purchase receipt. If there are problems such as breakage and severe deformation, please contact the brand after-sales service first to avoid welding or modification by yourself.
Qihao is a professional furniture hardware factory, they are well known to customers for their comprehensive products, good quality, and reasonable prices.
Qihao is a professional furniture hardware factory, they are well known to customers for their comprehensive products, good quality, and reasonable prices.
EN
